AUTOGROW
AUTOMATION AND CONTROL SYSTEMS FOR
GREENHOUSES, WAREHOUSES, AND GROW ROOMS
Bluelab's mission is to simplify the challenges of crop cultivation by offering advanced technological solutions and professional guidance. Autogrow, a division of Bluelab, specializes in providing reliable automation and control solutions for growing various crops. With Bluelab products, you can effectively manage your crops remotely, regardless of your location.
AUTOGROW SOLUTIONS
Autogrow all-in-one grow room climate controller offers complete control over temperature, lighting, CO2, air, nutrients, humidity, and more. With a single device, you can effortlessly manage all aspects of your cultivation environment.
With an automated irrigation and fertigation system, you can ensure uniform and timely distribution of water and fertilizer to your crops, relieving you of the pressure and effort involved in manual administration.
Autogrow's technology simplifies the management of multiple sites by providing a single platform for controlling and monitoring all of them.
Ensure precise watering, track run-off, and take control of your hydroponics and substrate systems with Bluelab's technology solutions.
Autogrow's multi-zone controller offers full customization, allowing module additions and changes as your business evolves, ensuring a tailored solution with flexibility and adaptability.
Autogrow offers detection solutions to control and monitor climate and fertigation, optimizing growing conditions in greenhouses, tunnel houses, and indoor facilities.
IntelliDose, a nutrient dosing system, efficiently handles nutrient and pH levels, while also providing remote alarm capabilities and data logging to track progress. It establishes the benchmark for small-scale commercial automated dosing in the industry.
Technical Specification
-
9 outputs 24VDC (or same voltage as supplied by plug pack)
-
Nutrient measurement units EC, CF or TDS (500/640/700)
-
Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM
-
Nutrient resolution to .01mS/cm, 0.1CF
-
Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (temperature compensated)
-
Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM
-
pH resolution and accuracy - 0.1pH
-
pH measurement range 2pH to 12pH
-
Nutrient and pH dosing times settable from 0 minutes to 254 minutes
More Product Information
Grower approved for over 15 years, the IntelliDose sets the industry standard for automatic nutrient dosing, allowing you to dose up to a 9-part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings. Automatically manage your nutrient and pH levels, set remote alarms and data-log your progress with one simple controller. Achieve better results with a nutrient dosing system.
With an IntelliGrow subscription you get remote access, data logging, and text/email alerts. All units come with unlimited tech support. Finally unshackle yourself from your reservoir!
Product Features / Benefits
-
Ease of use - The large, interactive screen allows you to easily maneuver between calibrating, set points, alarms, and configuration. If you can program a number into a cell phone, you can program your IntelliDose.
-
Run up to 4 irrigation stations - The IntelliDose can run up to 4 irrigation stations, allowing different areas of your grow space to be watered on different schedules. Use one reservoir or have a pump feed each station at different times. You can also set your system to only irrigate during the daytime.
-
Peristaltic pumps - Peristaltic pumps allow you to have all of your nutrient stock tanks on the ground, allowing for much larger quantities of pre-mixed solutions. This lowers the chance of leaks and spills and will cut down on your labor. Autogrow peristaltic pumps are available in sizes 120 ml/min to 1400 ml/min.
-
Works with any nutrient line - Any nutrient line can be used with the IntelliDose — liquid or powder. Simply determine your proper dilution ratios (don’t worry, we can help) and the IntelliDose will keep the reservoir at your perfect recipe 24/7.
Autogrow IntelliDose Kit
IntelliClimate, a comprehensive controller tailored for indoor growers, handles every aspect of climate control in a grow room. From temperature and CO2 levels to lighting and humidity, this all-in-one system simplifies the management of your growing environment. It offers unmatched accuracy, efficiency, and commercial-grade control, setting it apart from any other comparable controller available.
Technical Specification
-
9 outputs 24VDC Ratings of individual outputs are 3Amps but the total draw from all 9 outputs must not exceed the rating of the supply adapted
-
RH resolution ± 2% and accuracy
-
Temperature resolution and accuracy 0.5°C/32.9°F
-
Temperature sensor range 0-50°C/32-125°F
-
Operating temperature range 0-50°C/32-125°F (not in direct sunlight)
-
CO2 resolution and accuracy 50ppm
-
Power source – 120V/240V into 24VDC plug pack (supplied)
-
Outputs will have the same voltage as the supplied voltage from the power pack
-
Supplied with 3m USB cable
More Product Information
Your drive and dedication to maintaining the perfect growing climate keeps your business moving forward but often means sacrificing your leisure time.
The IntelliClimate from Autogrow is an intelligent grow room controller that automates the tasks that consume your days and nights. It runs the room to your exact specifications making calculated decisions to maintain your set points.
IntelliClimate controls fans, AC, lights, heaters, CO2 and dehumidifiers – and it will text and/or email you if something goes wrong. With an IntelliGrow subscription you get remote access, data logging, and alerts. All units come with a 2 year warranty and unlimited tech support. Finally unshackle yourself from the grow room and trust that your plants are going to be alright.
If you’re looking for a multi zone climate controller, learn more about our MultiGrow climate controller.
Why IntelliClimate?
-
You can access your control systems remotely through IntelliGrow
-
You can schedule based on growth cycles
-
You can manage all aspects of your climate
Autogrow IntelliClimate Kit
IntelliLink enables internet connectivity for Autogrow Intelli devices such as IntelliGrow, IntelliDose, and IntelliClimate. It allows you to remotely access and control these systems without the requirement of a dedicated on-site computer.
More Product Information
The IntelliLink serves as a gateway to connect your IntelliDose or IntelliClimate devices to IntelliGrow software. It uses your existing network infrastructure and replaces the need to have a dedicated on-site computer, streamlining your overall grow operation.
By having all of your Autogrow Intelli devices connected via the internet, you can stay mobile and manage your farm variables remotely, including temperature, humidity, light, CO2 and many more key factors. Stay up-to-date with what’s going on with your crops and plants and ensure that they’re always getting the attention they deserve.
The IntelliLink provides internet connectivity to Intelli devices , allowing remote accessibility to IntelliGrow software solution.
Use the Intellilink in conjunction with a subscription to IntelliGrow software for remote access controlling.
Autogrow IntelliLink
